Numi Chemical, a supplier of Low Temperature Epoxy Adhesive in China, is deeply engaged in the independent research and development, production and sales of products, and provides professional Low Temperature Epoxy Adhesive customization services according to different customer needs. NM-6166 is an ultra-low temperature Epoxy adhesive that can work for a long time in the temperature range of -200℃ to 150℃, meeting the bonding and fixing needs of special industries and promoting the sustainable development of the combination of epoxy resin and industry.
NM-6166 Low Temperature Epoxy Adhesive can work in a liquid nitrogen environment for a long time. After curing, it has excellent acid and alkali resistance, moisture and heat resistance, oil and dust resistance, moisture and water resistance, and aging resistance. It has high bonding strength, pressure resistance and insulation. It mainly used in aerospace, underwater submarines, biomedicine and other related scientific and technological fields,and suitable for the bonding and fixing of electronic components, crafts, and gifts. It has excellent bonding strength for the encapsulation bonding between metals, ceramics, wood, glass and hard plastics.
NM-6166 Low Temperature Epoxy Adhesive packaging specifications are 50ML per group, including 20kg/barrel of main agent and 5 kg/barrel of curing agent. Different packaging specifications can be customized according to customer needs.
| Item | A/B Ratio | A Glue Color | B Glue Color | Usable Time | Curing Time |
| NM-6166 | 2:1 | Light yellow transparent | colorless transparent | 30 minutes |
Normal temperature 26℃ 48 hours Heating 60℃ 7 hours |
| Hardness（Shore D）≥70 | Water absorption（25℃ % 24 Hours）<0.15 |
| Compressive strength（kg/mm2） ≥50 | Shear strength (steel/steel) (kg/mm2) ≥13 |
| Tensile Strength (Steel/Steel) (kg/mm2) ≥22 | Dielectric constant (1KHZ) 3.8~4.2 |
| Volume resistance (25℃ Ohm-cm) ≥1.35 ×1015 | Surface resistance (25℃ Ohm) ≥1.2×1014 |
| Withstand voltage (25℃ Kv/mm) ≥16~18 | Temperature range –200℃-150℃ |
Before using NM-6166 Low Temperature Epoxy Adhesive, make sure that the parts to be bonded and sealed need to be kept dry and clean; take the amount according to the ratio, and stir the A and B agents thoroughly after mixing to ensure the curing effect; after stirring evenly, please inject the glue in time. The product cures very quickly, so please try to reduce the amount of glue you mix at one time! The more glue you mix together, the faster it reacts and the faster it cures, and it may also release a lot of heat. Please pay attention to controlling the amount of glue you mix at one time, because due to the accelerated reaction, the time it can be used will also be shortened. Try to use up the mixed glue in a short time.
NM-6166 Low Temperature Epoxy Adhesive will begin to cure after mixing, its viscosity will increase quickly, and it will release heat. The curing agent may release irritating gases. It is recommended to operate in a ventilated environment and wear protective gear. If it accidentally sticks to the skin, please rinse it repeatedly with clean water immediately. Before using it in large quantities, please try it in a small amount first to master the product usage skills to avoid mistakes.
NM-6166 Low Temperature Epoxy Adhesive should be stored in a cool, dry place and sealed. The shelf life is six months. If it passes the test after the expiration date, it can continue to be used.
DIRECCIÓN
Edificio D, Yuanfen Industrial Zone, Bulong Road, Distrito Longhua, Shenzhen, Guangdong, China
Teléfono
Correo electrónico
