Nuomi Chemical is a China manufacturer and suppliers of single-component RTV room temperature curing silicone adhesive. The conventional product packaging of NM-509W-2 RTV-1 Silicone Adhesive For Electronics is divided into 100ML aluminum tube and 300ML 2600ML plastic tube. We also provide customized personalized packaging services according to customer needs. According to customer needs, different specifications of packaging are made for different scenarios to provide convenience for customers in the process of using NM-509W-2 RTV-1 Silicone Adhesive For Electronics products.
NM-509W-2 RTV-1 Silicone Adhesive For Electronics is widely used in bonding, fixing, sealing, electrical, insulation, anti-fouling, waterproof, shockproof, coating, electronic appliances and comprehensive small appliances, instrument analysis and other aspects.
NM-509W-2 RTV-1 Silicone Adhesive For Electronics has excellent bonding, fixing, sealing, electrical, insulation, moisture-proof, shock-proof, aging-resistant and other properties. After hardening, the RTV-1 Silicone Adhesive For Electronics can exert the original electrical properties of silicone, and has good elongation at a temperature of -50℃~250℃ (it can also maintain its original rubber elasticity against vibration and impact), and has weather resistance, heat resistance, and cold resistance. It can be firmly bonded to most materials such as metal, glass, tiles, plastics and their alloys.
| NO. | Test Item | Specification |
| 1 | Appearance | White, paste |
| 2 | Specific gravity 25℃ | 1.35~1.40 |
| 3 | Hardness JIS | 40~65(Shore A) |
| 4 | Elongation | 250~400(%) |
| 5 | Tensile Strength | 20~35(MPa) |
| 6 | Tack free time | 2~15（MIN） |
| 7 | Volume Resistivity | ≥3× 10^14(Ω.cm) |
| 8 | Strength of breakdown voltage | 20～25(kv/mm) |
| 9 | High low temperature | -50℃~250℃(℃) |
| 10 | Dielectric Loss Factor | ≤4 ×10^3(60Hz) |
(1) According to the amount of use, cut off the nozzle head and install the dedicated equipment and extrude it for use . It cures at room temperature and needs to be sealed after use.
(2) The data in the product description are non-standard values. The recorded content, product performance improvement, product specifications, etc. may be changed without prior notice.
(3) When using, be sure to test it first to confirm that it is suitable for your purpose. In addition, the uses described in the product are not guaranteed to be free from conflicts with all patents.
(4) Our silicone products are developed for general industrial use. If you are using them for medical or other special purposes, please be sure to test them in advance.
(5) Please ensure that you use them after confirming that they are safe.
DIRECCIÓN
Edificio D, Yuanfen Industrial Zone, Bulong Road, Distrito Longhua, Shenzhen, Guangdong, China
Teléfono
Correo electrónico
